可爱的小兔子储物盒盖

Goose Gear Cubby Cover

2024-03-19 12:10:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Goose Gear 2007-2018 JKU Cubbies are designed to have the seatbelt covers fill a hole by the roll bar where, however if you remove your rear seats and the seatbelts then you don't have a cover to fill the opening. For some reason they make a version for the JK without seatbelts but they don't offer that option for the JKU so I needed to design something.

This design give you a good looking cover that can be easily removed depending upon how you attach it. I secured them to the cubbies using three strips of velcro (only one is visible in the photo), but you could probably drill holes and secure it with screws. Glue would also work, but removing it would be problematic.

I printed these in carbon fiber with 30% infill, but PLA or PTEG should work fine too. If you wanted a quicker print you could probably get away with 10% infill, but be careful what you put on them.

How I Designed This

I designed this using OpenSCAD, it does leverage an open-source library for creating rounded cubes which makes for a smoother design. I've included both the STL and OpenSCAD file in case you wish to alter it. It could easily be made thinner if you wanted though it might not be as durable.