Tiger I 超级装备包

Tiger I Megapack

2024-03-19 12:10:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of Bergmann's Tiger I mid production.

WILL ADD MORE PICTURES LATER...
About 2gb worth of Tiger Files

Are you a tiger enjoyer? Well I'm here to out enjoy you! This pack consists of almost ALL Tiger I Production Variations from Early, Mid, and Late Production, every possible tiny little detail I could visibly add has been added.

Tiger H1 and E? Well it's not that simple, included are over 500+ turrets with every little mantlet change in production by the months.
Many files so turrets and chassis have to be split for me to upload.

Almost everything has been heavily research to be placed accurately according to design and date, there are however one just included for those interested with certain configurations. This is partially limited to reduce the amount of time I am working on this as well as keeping some historical accuracy probability.

There are some people who are extremely knowledgable and detailed in the Tiger I'd production modifications, if there are any errors please let me know and provide sources and references.

In this pack, there is no clear distinction between the Tiger H1 and E due to the general numerous amount of minor modifications. However it can loosely be pointed to in which variants they are. Late Turrets are pretty much just Ausf. E which everything subsequent is H1, for chassis everthing after March 1943 is the Ausf. E.

Provided with the files is a text document, it should list the basic of the external changes by months (except for turrets). This makes the chassis rather easy to pick out for time period and generally everything in March 1943 and onwards uses the Late Turrets with the J and K Mantlets types.

Will add...

Various Early Turret Stowages Bins
Reversed Smaller Diameter Two Cables on Early Chassis
Chassis Track Armor
Fix the Error with the Start plate Bolted on for all the one that have it vertical
Fording Equipment
Hull Track Armor
External Travel Lock (Glued on piece)
Jib Boom Lugs and Crane for Late Turret

Note: Very likely an issue printing the chassis with S-Minen Launchers due to their small size, that is a temporary solution in close to their actual size, any larger and it may interfere with the turret so this will be the one in use until I can figure a better design.

I did all of this in a week, there goes my sanity