GWS Pico Tiger Moth 2204 出轮支架

GWS Pico Tiger Moth 2204 Outrunner Mount

2024-04-13 09:58:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mount to use a 2204 outrunner on the original wooden stick that the brushed IPS geared motor mounted to. Keeps the prop in the same location as the IPS system, and should clear the stock cowl. You might need to trim the opening to clear the motor depending on the exact shape of the new motor, I only had to trim about 1/8" around the opening to clear.

Depending on printer, you might need to drill the motor mount holes out, I had to clean them up with a 1/16" bit to make it easier to thread the motor mount screws in.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Should be straightforward to print, I printed mine with no supports at all.