日产迈特aN MK60e5 ABS泵座垫

Miata NB MK60e5 ABS Pump Mount

2024-03-19 12:11:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter bracket to fit a MK60e5 ABS pump from an E90/92 BMW into a NB Miata. Fits NB1 and NB2; I don't know if NA's had the same bolt pattern.

I wanted to keep the pump in the OE location. Due to this requirement, it needed to be 2 separate parts. The pump bolts in from the underside and with the pump installed there is no way to access most of the existing threaded holes in the body.

The file attached utilizes 3x m6 heat set nut inserts to attach the pump bracket to the pump mount. I added the 4th horizontal/transverse bolt location to reduce pitching of the ABS pump.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
I recommend 50% infill for the pump bracket and about 30% for the body bracket.
Filament brand:
Polymaker
Filament material:
PA6-CF and PA6-GF
Notes:
Use a high stiffness material for the pump bracket. It doesn't have much triangulation. Combined with the very narrow pump bolt pattern and it will have more pitching under longitudinal accel. The body bracket is quite stiff. If you have too much flex in the pump, then it's likely coming from the pump bracket.