萨克斯风音符号麦克风支架（Thomann CC100 t-bone）

Alto saxophone microphone clip for Thomann CC100 t-bone

2024-03-19 12:12:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This clip can be used to put a t-bone CC100 microphone (Thomann) over your alto saxophone.
The diameter of the extrimity of the saxophone it was tested on was 12 cm. It may work on larger or narrower instruments, but you may consider editing the Freecad file.

Better to print the microphone handle vertically if possible.

Print Settings

Printer brand:
Dagoma
Printer:
Discoeasy 200
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20mm
Infill:
17%
Filament brand:
Chromatik
Filament material:
PLA
Notes:
try to print the microphone handle vertically if possible. It works fine printed horizontally but it lacks a bit of grip.