Endecker 3 控制面板

Ender 3 Control Box

2024-03-19 12:12:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WIP

This is Printed as ONE large piece

Working on covers

Print Settings

Printer brand:
Anycubic
Printer:
Kobra Max
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.3
Notes:
This is Printed as ONE large piece

Standards

NGSS CCSS

Materials Needed

1 - Orange Pi Zero 3 https://www.amazon.com/gp/product/B0CB1BYTT8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 1 - BTT SKR Mini E3 V2.0 2 - Wago 3 hole https://www.amazon.com/dp/B07W94XJSN?ref=ppx_yo2ov_dt_b_product_details&th=1 1 - 24V to 5V Converter DC-DC Step Down Module https://www.amazon.com/dp/B09DGDQ48H?ref=ppx_yo2ov_dt_b_product_details&th=1 1 - Mini USB Cable, 90 Degree USB 2.0 A to Mini B USB Cable Right Angl https://www.amazon.com/dp/B0CNV6Z5SM?psc=1&ref=ppx_yo2ov_dt_b_product_details 1 - Right Angle Micro USB Cable 3Pack, Short USB A to Micro B Cord 90 Degree https://www.amazon.com/dp/B09XK4JDBJ?psc=1&ref=ppx_yo2ov_dt_b_product_details 1 - USB Port Splitter https://www.amazon.com/dp/B08GY3GKRC?ref=ppx_yo2ov_dt_b_product_details&th=1 20(?) - M3 Alan Socket Head Cap Screws https://www.amazon.com/gp/product/B0BB1FJJKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Part Description

Complete_Box.stl
This is the Complete Box.... almost. Working on covers.
Test_Print.stl
This Part is used to make sure your bolts will fit before you print the hole thing to find out everything is to small or to big

IF YOU WANT TO MOVE THE PARTS AROUND

Box.stl
The Box without anything inside. There are holes for for the wires to enter in the back, and a hole for the USB.
BBT_E3_v2.stl
These hole lineup with the BBT E3 v2. The USB power is marked along with marking for space for it to plug in
OrangePi.stl
These holes lineup with the Orange Pi 3 Zero. Power and SD card are marked
3_Port_USB.stl
NOT SURE IF THIS FITS CORRECTLY. These holes line up to mount the USB hub to. This is meant to be on the side with a hole in the front
Wago.stl
Wagos fit snuggly in the slots to hole them in place
DC-DC_Converter.stl
These holes lineup with the 5v power supply. Some space is marked to leave room for the wires.