福隆霍洛体微型SD卡存储（修订版）

Fallout Holotape MicroSD Card Storage revised

2024-03-19 12:12:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As a fallout fan I was very glad to find this original by Mrmunoz2616_.

But after printing and using I found 2 big flaws.

The µSD-cards are to lose or to firm in place. Also removing the µSD-cards was not optimal. So I decided to make a complete redesign of the slider.
I extended the slider as there was unused space in the case.
I designed a microsd slot so you can remove a card with two fingers.
To do so, press the short part of the card downwards into to slider. By doing so the long side should move into the air. With the second finger you can now grab under the card and remove it without big effort.
The slider fell of the case. So I made holes for 4 3x2mm high power neodymium magnet. I glued them with CA in place. Pay attention for the correct polarity of the magnets.

On my Anycubic Mega 3S the 4 µSD-card slots have a lightly tight grip.
The other 6 are optimal.
Depending on the accuracy of your 3d-printer you should test if the µsd-card fit proberly.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega S/Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
don't know anymore 10% - 25%
Filament brand:
Das Filament
Filament color:
white and nature
Filament material:
PLA

How I Designed This

I used Freecad 18+19+21.
Despite many crashes because of my unusual way of using the software I managed to use the existing parts as solids.
I used only the IMHO easier way of the part bench instead of the mightier but complexer part design bench.

The size of a micro- and fullsize secure digital card I took from the official specification document.

福隆霍洛体微型SD卡存储（修订版）

朋友，你觉得上面这个模型，属于下面的哪个分类？