三颊磨床与钻孔适配器

3 Jaw Lathe Chuck & Drill Adaptor

2024-03-19 13:48:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of marcinszydlowski's 3 Jaw Lathe Chuck with a few changes:

Added an adaptor that can go into a hand drill chuck
Added parts to remove the need for any non printed parts
Used LeefusSqueefus's Jaw Remix which combines the Jaw and Jaw Foot from the original design
Split the Spiral Wheel into two pieces to make it easier to print nicely
Redesigned the key as a hexagon to reduce the amount of support needed
Removed fillet from the bottom of the housing

An example 3MF file of my print settings, and F3D design files, are included

Part	Notes
Housing	Organic/Tree supports
Spiral wheel Track	Combine with Spiral wheel Cog
Spiral wheel Cog	Combine the two parts with super glue, using 5mm of filament in each hole to help with alignment
Pinion key	Print 3, 100% infill for more strength
Pinion key lock	Print 3, 100% infill for more strength
Jaw 1	Snug/Grid supports
Jaw 2	Snug/Grid supports
Jaw 3	Snug/Grid supports
Key	100% infill for more strength, Snug/Grid supports
Internal lid	Optional, Glue onto housing using filament to locate (or use screws/bolts, in the 1.75mm holes)
Drill Adaptor Lid	Optional, Combine with Drill Adaptor Shaft
Drill Adaptor Shaft	Optional, Combine the two parts with super glue, using 10mm of filament in the hole, taking care to take into account the overhang relief in the hole in the shaft
Drill adaptor	Optional, 100% infill for more strength

Print Settings

Resolution:
0.2mm
Infill:
20%, 100%

Tags

License

3 Jaw Lathe Chuck & Drill Adaptor
by nonbin is licensed under the GNU - GPL license.

三颊磨床与钻孔适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型