G&G G2/G2H 机械传动器部件 3D 模型

G&G G2/G2H Gearbox Parts

2024-03-20 12:36:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A compilation of various G&G G2 and G2H compatible parts that I've modeled while teching. Most of the parts will work with both G2 and G2H gearboxes. The parts are very close to the original but it may be necessary to post-process some of them.

Included are all the selector parts for the G2/G2H boxes except the keyed selector transmisson pin.(which should be made from a 3mm pin) The selector parts are supplementary for the most part, I wouldn't recommend swapping all your OEM parts for these without reason.

The HPA spring guide is a drop in replacement for the original spring guide if you're installing a cylinder-type HPA engine. It shouldn't rattle around and fall out like the original spring guide since it is designed for the absence of a spring to hold it into the back of the shell.

The spring guide spacers are shaped to the OEM G&G spring guide for use with an AEG setup to add tension to your spring. They come in various sizes to produce differing FPS changes.

Though it isn't for the gearbox, there are two versions of the barrel brace which is made for slotting into the front of the URX 4 to hold the barrel centered under the weight of a suppressor. It is made for an SR-25 and may fit SR-15/SR-30s, but I have not had a chance to test it.

If you have questions feel free to message me.