Weeping Willow Tree - 第二次尝试

Weeping Willow Tree - Try 2

2024-03-24 10:01:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Weeping Willow Tree - Try 2

My wife thought my first attempt at a weeping willow tree was too "square" (https://www.thingiverse.com/thing:6540650), so I rounded this version a litte.

Printed using PLA.

Used a layer height of 0.2 mm. However, layer heights of 0.1 mm or 0.3 mm will work since the tree parts are 1.2 mm thick.

Print the following:
One tree_trunk_willow_240318g.stl
One willow_tree_240321k_LARGE_UP.stl
One willow_tree_240321k_LARGE_DOWN.stl
Two willow_tree_240321k_SMALL_UP.stl
Two willow_tree_240321k_SMALL_DOWN.stl

See assembly instructions in images assembly_01.png through assembly_04.png

Additional files:
tree_trunk_willow_240318g.3dxml is a Catia 3Dexperience (maker version) file for the tree trunk geometry
willow_tree_240321k.skp is a Sketchup 2017 file of the branch geometry