雪mobile CK3 转向销部件 572108500
Skidoo ck3 steering bushing 572108500
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanSummary
steering rod guide bushing for skidoo ck3 chassies 98-03
I made mine in addnorth adura nylon, but i have also printed in petg.
0.2mm layerheight. no supports needed
Heat the bushing in hot water (60-70c) before installation to make it a bit softer and ease up the installation.
This is a tight fit, make sure your printer is well calibrated.
Print Settings
- Printer brand:
VoronDesign
- Printer:
Voron2 Custom
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:0. just use walls
- Filament brand:
Addnorth
- Filament color:
black
- Filament material:
Nylon and petg
- Notes:
steering rod guide bushing for skidoo ck3 chassies 98-03
I made mine in addnorth adura nylon, but i have also printed in petg.
0.2mm layerheight. no supports needed
Heat the bushing in hot water (60-70c) before installation to make it a bit softer and ease up the installation.
This is a tight fit, make sure your printer is well calibrated.
联系我们
热门推荐
-
手提袋受Pikachu启发2023-05-04 -
帕维尔·切科夫 3D模型角色2023-06-08 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
Galaxy折叠手机系列4/5控制器适配器3D模型2024-03-21 -
小米智能手环8Pro充电座2024-04-29
最热下载
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01 -
街用迷你四驱车轮子2024-05-01 -
沙箱建筑模型2024-05-08 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
塑料扣（3D打印无需支撑设计）2024-05-08 -
Mini砂块旋钮2024-05-08 -
野马Mach 1雾灯支架模型2024-05-08 -
宝可梦球隐藏2024-05-08 -
PlayStation 2遥控器电池盖3D模型2024-05-06