P90 M4 适配器
P90 M4 adapter
2024-03-20 15:16:24
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of 2 pre-existing models by Terrry_Rist and AngelshipAC130 combined and then with my twist.
I didn't like that the M4 mag was pointing straight up so I changed it to 70 degrees instead. It didn't really fit on my printer so I had to print it at a 45* angle on both x and z axis.
i printed it at 101% as well and everything fits perfectly.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Yes
- Supports:Yes
- Resolution:0.2
- Infill:20
- Filament brand:
.
- Filament color:
black
- Filament material:
pla
- Notes:
I had it at 50 speed and it took me about 36 hours to print.
Post-Printing
Layer shifts
I had unfortunately layer shifts while printing this but i was able to take those pieces off and then glue them on where they were supposed to be and it still works!
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
3D模型：Creality Ender 3 S1 Pro网络摄像头固定架2024-01-14 -
3D物理引擎基础模块2024-01-15 -
阿尔托德斯潜伏追踪者（箭矢+槽位+抛掷刀）2024-03-29 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
斯图尔特-罗埃洛夫斯十二面体多结模型12024-04-08
最热下载
-
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
空客操纵杆配备控制杆固定装置2024-03-30 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
比基尼模型2025-07-16
最新模型
-
智能路甲车通风控制杆2024-05-08 -
泳池盖卷帘3D模型2024-05-06 -
泡泡魔杖瓶架2024-05-06 -
车盖扣环衬套2024-05-06
