莫多洛 1号系列模块化电池系统 - 18650型号

ModuLOL - 1S - Modular Battery System - 18650

2023-03-26 18:38:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Welcome to ModuLOL,

n1 Project overviewn2 Disclaimern3 Print Part 1 - The Casen4 Print Part 2 - The Filletn5 Print Part 3 - The Lidn6 Print Part X - Adapter Geometry

Project overview

The idea is to have a battery pack which can be adapted to a variety of electrical devices. The connection between battery and device is realized with magnets. The current is also been transmitted over the magnet connection.

https://www.youtube.com/watch?v=pyo83wtpKFg

Since most of the adaptable consumers I used are quite unique (e.g. little motor from a drone or a 1W led with lense). Therefore the project aims to give you the adapter geometry and you can design your own gadget / flashlight / bikelamp? / Powerbank? / Laser?. (however I will share my adapter models without comments)

I tryied to work with as much standard parts as possible. Unfortunately the switch and the spring (see BOM at 4.) are quite unique. If you have a smaller switch you can print a small housing and place it there instead of my used one.

For step by step tutorial check the attached PDF / PPT.

Disclaimer

I am not an electrical engineer. My background is more on the polymer side. So please only build this if you can estimate the risk, especially in terms of electronics. (e.g. LiIon Battery, soldering, max current per wire mm², resistors for high voltage LEDs…)

Print Part 1 - The Case

BOM:
nM3x10 hexagon socket screw (2x) !non-magnetic!,nNickel Strip 93x8x0,15 (2x),nMagnets D8mm Thickness 3mm (2x),n18650 Li Ion Battery, (e.g. ICR18650-26P)

Description: The case is made of lightweight polymer material, with built-in battery compartment and connection interface for the control unit.

Print Part 2 - The Fillet

BOM:
nHigh-quality ABS filament (0.6mm diameter),nStandard hotend (temperature range: 200-220°C)

Description: The fillet is used to connect the case and battery compartment, ensuring a smooth and durable connection.

Print Part 3 - The Lid

BOM:
nUV-resistant ABS material,nHigh-precision settings for detailed engravings

Description: The lid is designed with a built-in compartment for additional accessories, and it can be customized with your logo or other engravings.

Print Part X - Adapter Geometry

BOM:
nCustom 3D printed adapter geometry,nPrecision: ±0.1mm

Description: This is the key component that allows the system to interface with external devices and modules, ensuring compatibility and functionality.

莫多洛 1号系列模块化电池系统 - 18650型号

朋友，你觉得上面这个模型，属于下面的哪个分类？