Tremor XL底架

Tremor XL Chassis

2024-03-21 01:50:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the XL version of my Tremor chassis. It is a low CG-style chassis / Comp chassis. I recommend using the C10, Jeep Wrangler, Bronco sized links.

The XL version allows for 6mm extra (3mm on each side of the skid plate) for larger motors and 8mm extra in height.

I included the F360 file to make remixing easy.

Please post your makes!!!

WHAT TO PRINT:
1x Top
1x Hood
4x Peg
1x Battery Tray
(Optional) 1x Front Tray
1x Skid Plate
1x Front, Mid, Back
1x Front, Mid, Back (Mirrored)

Screws Needed:
(Pink) 8x 5mm (4 for the pegs / 2 for the hood / 2 for the battery tray)
(Green) 10x 5mm-8mm (4 for the skid plate / 4 for the optional front tray / 2 for the top)
(Yellow) 4x 8mm (to mount the back end of the battery tray to the chassis)
(Orange) 4x 10mm (to mount the lower links to the skid plate)
(Cyan) 4x 12mm (to mount the upper links to the skid plate)

Check Img

PRINT SETTINGS:

I recommend printing the hood, top, and pins vertically.

The left and right halves of the chassis can be printed on either side with no supports for the recessed holes. I used a trick to print small bridges instead of one flat side.

If you are interested in selling 3D prints of this model please contact me