苹果手表立体适配器模型

Laut Apple Watch Stand Adapter

2024-03-21 07:42:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an updated version, which is designed to be printed in a flexible filament (such as TPU) and was designed with higher precision than the original.

We lost the rubber surround for the Apple Watch charger that fit the charger into the stand (see https://www.shopmyexchange.com/laut-apple-watch-stand/1758175). Additionally, the watch would rub on the aluminum stand, potentially damaging the watch. After seeing a newer version of the stand (see https://www.amazon.com/LAUT-Official-Aluminium-Stand-Silver/dp/B01BGJLITU), I fashioned a solution that holds the charger snug in the opening as well as protecting the watch from the stand.

I have included STL, STEP, and DXF files. My OnShape document for these parts is https://cad.onshape.com/documents/6d76bf266007d3d4e10470ce/w/3e0ec3257d7c8109dc3ee9e0/e/aef3a3c2a06b288946f1d8f3

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Filament brand:
PRILINE
Filament material:
TPU
Notes:
Depending on the finish you want on the top surface, you may print with either the top face on the print bed or the top face up. If you print with the top face on the print bed, rafts are unnecessary. However, you will likely need (at least) a brim or rafts if printing with the top face up.

Post-Printing

Pass the USB plug through the opening of the printed piece, pulling the cable most of the way through. Insert the printed piece into the Laut stand, then insert the "puck" part of the charger into the printed piece.

苹果手表立体适配器模型

朋友，你觉得上面这个模型，属于下面的哪个分类？