阿卡纳森的军团GO定制背板

Arcanazen's Legion Go Custom Backplate

2024-03-21 08:38:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my take on the Lenovo Legion Go backplate created by whisperit. I added a smaller grill so it looks closer to the stock grill, also the ssd area comes with holes (2230/2242/2260/2280) to securely attach your ssd using a standard screw for nvme. Only single sided SSD are recommended because a double side could bend/melt backplate (unless you use a very high heat resistance filament). Finally the ssd cover has 2 holes for M3x5mm screws to protect the ssd even more.

You will need M2x3x3.5mm brass inserts and also soldering iron with small tip (small enough to hold the inserts) or a 3d pen (or you can use something else to hold insets while you heat them up to melt the parts) to assemble the stock hinge with the kickstand. You can buy them from here: https://www.amazon.com/dp/B0B8GN63S2

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament brand:
TINMORRY
Filament color:
Black
Filament material:
PETG-CF
Notes:
I provided a 3MF file from Bambu Studio that included everything ready to print