LED灯光夹具

LED Light Clip

2024-03-21 09:21:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had so many of these balloon LEDs, they're a dime-a-dozen on Amazon, and I REALLY needed better (hands-free) lighting when working, so I made these clips for my Milwaukee safety glasses (Milwaukee 48-73-2020, and its shaded version).

The LEDs can be found for cheap on Amazon from multiple sources. Here is one:

https://www.amazon.com/Yizhet-Balloon-Multicolor-Christmas-Birthday/dp/B0BKRXGMX6

LED Specs are in the photos section, although my measurements are 12.84mm x 30mm exactly, anything looking like the photos will be the correct one, like every other Amazon spammed product ;)
I recommend cutting off the little loop in the back so the switch is easier to toggle without looking. The seam is what grips the clip well, so make sure your switch is vertical. Click up, ON. Click down, Off. Slide it back to front of glasses and it'll be solid.

You can also Mirror it in your slicer so you can have TWO LED lights on your safety glasses! Works great.

No supports needed. Brim recommended. Easy to print.

Enjoy!

If you would like to support me directly so I can have time for more designs you can Tip with Paypal here or click the "Tip Designer" Button!