剃刀 SX500 油门盒安装支架
razor sx500 throttle box mount
2024-04-11 09:45:03
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This mount is for the top frame bar of the razor sx500 to mount the domino throttle boxes to it. might fit other models of razor if their frame is 40mm wide. i put a piece of double sided tape under the mount as well to keep it in place.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:Yes
- Supports:No
- Resolution:.2
- Infill:100
- Filament brand:
esun
- Filament material:
pla+
- Notes:
printed it on its side so it didnt need support. added a raft to make sure it didnt fall over.
License
CC BY-NC-SA
razor sx500 throttle box mount
by kirkcody is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
Ender Board 螺丝模式2024-05-08 -
母亲节墙面艺术2024-05-08 -
酷蠕虫2024-05-08 -
低面数花朵2024-05-06 -
Jenga盒子2024-05-06
最热下载
-
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Articulated Snake2024-03-30 -
FFBeast仿真飞行器模拟轮部件2024-04-19
