Dewalt 6.5" Circular Saw Mount (DCS565)

2024-03-21 13:14:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wanted an easy way to mount my Dewalt 6.5" circular saw in my garage. I designed a two piece mount that the tool slides in and out of easily.

Screw the two pieces into the wall with a 10" gap between them. Slide the top of the plate of the saw all the way up into top piece, rotate the bottom of the saw in between the two, and then lower it into the lower piece. You can see how it works at https://www.youtube.com/shorts/xRfUFGC8OaE

The screw holes are designed assuming the bottom of the heads of the screws are flat (e.g. pan head, round head, hex washer, etc.). The screws should have shafts that fit through a 5mm diameter hole, and have a head with a diameter larger than 5mm and smaller than 10mm. (I'm making this sound complicated, but most screws for wall mounting will meet these requirements)

Print Settings

Printer brand:
UltiMaker
Printer:
Ultimaker 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
70%
Filament brand:
Polymaker PolyLite
Filament color:
Gray
Filament material:
PETG
Notes:
The bottom piece in particular needs to be strong. I printed using PETG, with 5 walls and 70% infill, which is about as strong as I know how to print things like this. Since it's held up with screws, extra walls are important, but 5 is arguably overkill.