Garmin车把安装支架

Garmin handlebar mount

2024-03-21 20:04:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Body should be printed with the flat face down, the hinge laid on the side and the varia adapter with the hex nut holes pointed up. For the Body I used 15 top layers, which adds up to a thickness of 3mm, because most of the forces are pulling on that. It should preferrably be printed in PETG or ABS or similar. Although I printed my first version in PLA+ and so far it´s holding up, but still PLA is not optimal for this application.

Print Settings

Printer brand:
Anet
Printer:
A6
Supports:
Yes
Resolution:
0,2
Infill:
10

Post-Printing

The parts are assembled with M3 screws and nuts and a 1,5mm thick rubber in between the clamping diameter and the handlebar, that I cut from a rubber seal. For the Varia adapter I used coutersunk screws. The length of the srews has to be fitted.