3PIN三脚接头 Ws2812b SK6812 12mm Dupont (WIP)
Connector 3PIN Ws2812b SK6812 12mm Dupont (WIP)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this thing so as not to solder to the LEDs because I am very lazy and do not want to take out the soldering iron once again. And it also helps a lot with prototyping.
ATTENTION: this type of connection is not designed for heavy loads, it is not necessary to use it to connect lengths of tape longer than 0.5 meters, otherwise a fire may occur!
If you want to support me, then I would be grateful
https://www.donationalerts.com/r/frentez
V1 Patch note: The current version has not been tested, so it may not work as well as you would like, later I will attach photos and a corrected model if there are flaws in it
Tags
License
Connector 3PIN Ws2812b SK6812 12mm Dupont (WIP)
by FrenTEZ is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
热门推荐
-
全能3D打印机测试2023-03-26 -
乐高火车轨道 - 直线型配有RC522安装模块2023-04-15 -
负数块键盘升起2023-04-26 -
osVAC新型法兰饼夹具（M25）2024-03-17 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
红米手表4号充电基座2024-03-15 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
3d打印的男人凉鞋2025-07-17 -
坏龙家的大宝贝女生别下2025-06-26