微缩版房灯饰3D模型

Miniature house lantern light

2024-03-23 04:02:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Miniature house to use as a light source lantern.

in the photos i used battery powered flickering candle light, but you can use any small battery operated light Do Not use real candles

*what you need to print:
2 x side glass.
1 x front glass.
1 x top glass.
1 x bottom plate.
1 x back plate.
1 x roof.
1 x front wall.
1 x right wall.
1 x left wall.

*Assembly:

use 4 pieces of M3x6mm to fasten the top holes of the walls.
use 4 pieces of M3x8mm to fasten the bottom plates with the walls.
use any clear crafting glue to stick the glass to the walls (just few little drops will do the job, do not over flow the glue.
start fastening the back plate to the side walls then the connect the bottom plate to the walls.
Roof does not need glue nor screws, i made it so it can sit on its place for you to open to put and remove the light.

hope you enjoy my design, and i appreciate your support, to encourage me to create more unique designs