达尔文之旅：博物馆展览封面

Darwin's Journey - Museum-Cover

2024-03-23 18:03:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I printed the insert from Dukesavard for Darwin's Journey. https://www.thingiverse.com/thing:6402451. Thank you for that nice insert.
But I faced the problem, that the museum display is not secured for shaking the box and the tiles would fall out.

This cover prevents this. The model itself is rather simple. The nice looking was done in the slicer. Don't know if other slicers work similar. With Bambu Studio I added a modifier to the object and with the modifier I reduced top and bottom layers to zero in the area where the modifier is. With a nice infill-pattern this looks great.

The only problem I had, was the edge on top, where my printer produced some strings. But it works anyhow. If there is interest I can remodel the top edge to a smaller size, so that the overhang is smaller.