达尔文FPV 小猴子跑车手臂支架 Pro版 + 贝塔FPV 2秒 450mAh 安装架

DarwinFpv TinyApe Runcam Thumb Pro + BetaFpv 2s 450mah Mount

2024-03-21 19:08:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

达尔文FPV 小猴子跑车手臂支架 Pro版 + 贝塔FPV 2秒 450mAh 安装架

Summary

Notes:
. Rotate before printing, the down-plate is flat on the bed
. I tried with & without support, It prints better without support
. Little bit of cleaning strings required after the print

This is a Runcam Thumb Pro-W 4K holder + a battery holder for DarwinFpv TinyApe Freestyle 2.5 inch

FPV Drone: DarwinFPV TinyApe Freestyle 2.5
Battery: Lava 2S 450mah
Camera: RunCam Thumb Pro With the original camera holder

I used the same standoff screws in the front and in the back 2.5mm. zip tie with the lock under the frame

Then I reduced the power cable length (you might not have the same length as I saw in reviews and pictures) so I can load the battery from the back and just plug the power

You can also plug the battery from the front with the power cable facing the front, but then I needed to manage the power cables to avoid the risk of touching the propellers, which I could manage by using the battery strap.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament brand:
FilaTech
Filament color:
white
Filament material:
PLA
Notes:
I didn't try other materials since I only have PLA

Maybe TPU would be interesting.