云与月的音频按钮屏幕外壳

Cloud and Moon Speaker Button Screen Enclosure

2024-03-23 18:17:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is very easy to print with no supports, but it will need the cloud gluing onto the moon (that way you can have two different colour filaments). It's designed to hold this lovely little SPI screen from Waveshare, two buttons that have a 12mm cutout and a 30mm speaker.
https://www.amazon.co.uk/dp/B081Q79X2F

Full details including code on github here https://github.com/SANGERA2/moon-sleep-helper/

This was designed to use an air quality sensor inside the moon, which is why the back is so open and it's separated from the main compartment via a small hole.

The backs have a pretty tight tolerance so they fit on with friction, but you could always add a little glue once you know everything is working.

There is no hole for a power port, my idea was you'd just run the USB cable through one of the slots.

This is designed to be used with a full-size Raspberry Pi so there's a lot of room in there, but it would be easy to shrink down to be slimmer if you're using an Arduino or something. You'll need to use an angled headphone adapter and USB adapter on it for it to fit in.

Buying a KitSound Mini Buddy speaker, ripping it to pieces, removing the battery and powering it via USB is a great option for the speaker and you get an amplifer included! :) https://www.amazon.co.uk/dp/B008YU2P5Q/ Or you could buy the speaker separately and use a cheap PAM8403 amp.

Print with 4 perimeters and 100% infill. Use 0.6mm line width and it will be perfect.

云与月的音频按钮屏幕外壳

朋友，你觉得上面这个模型，属于下面的哪个分类？