3dsjs

19-26mm夹具安装

Pole Clamp mounting 19-26mm

2024-03-23 18:45:57

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I wanted to make camping lights using an off the shelf low cost plastic bulkhead like Eurolux B174 (https://www.eurolux.co.za/products/B174) but I needed a way to attach it securely in any direction to a pole of Gazebo or tent. So I designed this clamp to fit around a pole between 19mm-26mm, maybe even bit bigger, with a captive screw to tighten and loosen without the clamp falling out. But I can see many applications where you want a clamp to fit around a pole to fit something.

Use a strong but somewhat flexible material like PETG or ABS. The screw thread should be vertical in Z axis for best quality, and that will also help strength of the clamp itself. Version 1 screw is a little thin so if there is interest I'll make one with a larger thread.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 5

  • Resolution:
    0.2
  • Infill:
    50%
  • Filament brand:

    eSun

  • Filament color:

    Grey

  • Filament material:

    PETG

License

CC BY-NC

Pole Clamp mounting 19-26mm
by riaanjvr is licensed under the Creative Commons - Attribution - Non-Commercial license.

19-26mm夹具安装
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢