WLED D1 Mini Pro Box
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a WLED project box used for mounting a WeMos D1 Mini V4.0.0. It provides keyhole mounting to mount the box to a flat surface, making it easily removable for maintenance.
Two lids are included, one with a WLED label and one without.
Two boxes are included, one for connecting to 5v power using a VSB-C Plug to 2 Pin Bare Wire Open End Connector, and one for a typical 2.1 mm DC power panel mount socket. Both boxes include a port for a reset button.
Hardware used:
- AITRIP WeMos D1 Mini V4.0.0
- Type USB C Pigtail Cable Extension
- Momentary Button
- D1 Mini Mounting Screws - M2 x 6mm
- Lid Mounting Screws - M2 x 10mm
There is no panel mount for connecting the data lines to the WLED strip. I use terminal blocks for this, but am open to suggestions on how to improve this.
Fusion 360 files are included.
Wiring details can be found here on my website.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:20.0%
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
车顶防撞杆末端盖2023-05-08 -
精美系列 30mm 和 40mm2023-05-13 -
立方体螺旋容器2023-05-17 -
SNZB-04户外箱2024-03-20 -
3D模型: Lula2024-04-07
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Voith Schneider 螺旋桨 VSP2023-04-11 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
丰田22RE发动机Starer电机2025-08-08 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24