DIY边缘绘画支撑结构
DIY Painting edges supports
2024-03-23 22:35:10
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
DIY Painting edges supportsDIY painting edges supports.
For many years I had bits of copper pipe on a string to elevate painting surfaces.
Went to try the 3D printed version on this site found the print time was very long.
Could not tie them together to stop them from getting lost.
Decided to print these because they were very quick and could be tied together.
These print very quick, four at a time.
Tags
License
CC BY-NC-SA
DIY Painting edges supports
by Mervyn3D is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
联系我们
邮箱: 289047960@qq.com
热门推荐
-
2023款智能立体打印机箱2023-03-26 -
简单背包挂钩2023-09-16 -
精密1/24比例RC雪猫车身模型2024-01-17 -
Geberit 8MM轴型号把手2024-03-25 -
适用于MK2 Scirocco的三件式格栅夹具套装2024-05-06
最热下载
-
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
Daft Punk Thomas 3D打印可穿戴头盔2023-03-26 -
弓箭和投射器战车前轮2023-04-12 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
街用迷你四驱车轮子2024-05-01
最新模型
-
3d打印的男人凉鞋2025-07-17 -
泡泡底拖鞋2025-07-17 -
RAM 垂直式笔记本支架2024-05-08 -
适用于任何步进电机的弹簧联轴器2024-05-08 -
充气器盖2024-05-06