硅胶印刷机工具组织器

Resin Printer Tool Organizer

2024-03-23 22:35:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Printed in two halves so it would fit on my print bed. I glued them together (completely unnecessary) then used four wood screws to mount it to the wall over my workbench.

The left-most "tool" is the turntable for an Elegoo Mercury Plus washing and curing station. A super magnet holds it in place. The .3mf and .bgcode files include a pause at layer 27 (5.4 mm) so you can install a 12x6x3 mm magnet.

I discovered that two semicircle shapes work GREAT for holding certain tools like: tweezers, pliers and flush-cutters. Hanging the tweezers is particularly satisfying. The curved walls automatically compress the tweezers as you push them in, and friction holds them in place. You basically just "stab" them in.

The only difference between the pliers and flush-cutter holders is the separation between the semicircles. The flush-cutter mounts are a little farther apart.

The big scraper's hook is reinforced with a steel nail. After the print is complete just push in a 1" x 17 wire nail (1/5 mm dia. by 25.4 mm long) from the back. There is a countersink for the nail head so the organizer will sit flush against the wall.

There is a sacrificial layer at 1.4 mm (the top of the nail's countersink) to support the bottom of the nail's tube. Just push your nail right through it.

If you'd like to know more about this idea of using a nail to reinforce a peg, visit
https://www.thingiverse.com/thing:6543637

Note

PrusaSlicer will show errors for both .stl files. Don't fix them! If you do, the slicer will fill-in the magnet's cavity on the left side and the nail's tube on the right side.