3dsjs

发线滚筒混搭版3.5%倾斜安装支架适用于Ender 3 Pro

Filament spool holder remix 3.5 percent inclined mount 3,5 7 grad geneigte Halterung Ender 3 Pro

2024-03-23 23:04:04

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Thanks to HugoHuge for the Nut (FillerBraceCrealityNut.stl), the roller (3DPNFilHoldRoller.stl) and the template.

Printsize of the roller and the nut: 100%
Printsize of the holder: 10% in all directions

I recommend the V4, if you want a horizontal holder i recommend the V2

2x 608 ball bearings are required.
2x cable ties can optionally hold the ball bearings in place.

Tags

License

CC BY-NC

Filament spool holder remix 3.5 percent inclined mount 3,5 7 grad geneigte Halterung Ender 3 Pro
by Torge3D is licensed under the Creative Commons - Attribution - Non-Commercial license.

发线滚筒混搭版3.5%倾斜安装支架适用于Ender 3 Pro
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢