小兔子手机支架

Bunny Phone Holder

2024-03-23 23:32:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bunny as a toy, phone holder, keyring

Check out more models from Phone collection
https://www.thingiverse.com/c47_3d/collections/39433281/things

or Easter Collection
https://www.thingiverse.com/C47_3D/collections/17109892/things

Number in file names is a space for a phone in mm - numbers are also marked on the model (inside the hole)
For phone thickness of 6-16mm
If you will need other sizes you can resize any model in your slicer (preferably the closer one)
Use the equasion:
<Needed space (in milimeters)> divided by multiplied by 100% =

May not be suitable with phone set vertically but it depends on phone size and it's weight - mine works fine
The smaller the gap between the print and a phone the better chance it will not fall
The gap is cut with 16dgr angle but if the hole is bigger than a phone this phone will have a bigger angle (less stable)

To make a keyring
use a Bunny model of your choice and add there a keyring model. Both models should be in the exact same position in your slicer to be sure that they will merge properly

Then merge both models

Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot with a Bunny - Ignore model 'errors' and DO NOT try to 'fix' the model

Models are in two versions
Normal with low poly eyes (or rather small dents ;))
and Holes with… holes instead of eyes - you can leave it like it is or put a 1.75mm diameter filament there as eyes (as on some photos)

If you want to sell prints of this models just write to me, I will prepare a commercial license just like with other models from Phone collection

Print Settings

Notes:
Printed with 0.4mm nozzle
0.1mm layer height (you can use 0.2mm too)
2-3 walls
7-15% gyroid infil - may be printed without infill too. I used Prusa Slicer wich automaticly added some more walls or supporting bridges when needed
NO supports