OpenAPS项目案例：Raspberry Pi 0W与RFM69HCW搭配

OpenAPS Case - Raspberry Pi 0W with RFM69HCW

2024-03-24 04:33:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an OpenAPS belt clip case for a Raspberry Pi 0W with a wired RFM69HCW. The power control, battery connection, and belt clip designs are highly specific to my use case, as I designed them around parts I already had laying around. However, the organization of the system and the overall concept is applicable for others to design from.

Notes on the aspects specific to me:

The battery charge controller was taken from a portable battery back for other Lithium-based batteries.
The battery contacts were taken from other battery packs for AA's or AAA's.
The belt clip was leftover from the Animas pumps I used previous to looping.

Some notes about this design:

The system is a Raspberry Pi 0W, with a RFM69HCW soldered via connecting wires.
The batteries are a pair of 18650 cells in parallel for extra run time between charges.
There's a dedicated channel for holding the antenna on the RFM69HCW. The diameter is specific to the wire I used.
There's space reserved for the micro USB plug for powering the Pi.
The spaces for the Pi and the power controller have diamond shapes cut out for heat dissipation. In my case, it also serves for observing the status LEDs on the power controller.
The antenna side cap, includes a "peep hole" to see the light from power LED on the Pi.
The same cap also includes two pairs of holes to place bare copper wires exposed to the outside of the case. These are wired and soldered to pins 5 and 6 of the GPIO to serve as the power button. This should be rarely needed, hence the lack of a real button. The main goal was to keep it low profile. Should this be needed, I just use something metal to touch the two wires together.

This was designed in OnShape. You can see the original model here:
https://cad.onshape.com/documents/1e359f3ba644dc6ea35fdb51/w/be00e70f42a18d4e5abc3f7d/e/af65fd2023ad0224a3691240