Slatwall VESA固定架

Slatwall VESA Mount

2024-03-24 07:10:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Print this with it laying flat on its back and add supports for the slot overhangs. Prints very nicely and should fit easily inside a standard 4x8 sheet of slatwall.

This is a standard VESA mount size and great for adding a CCTV or PC monitor to your slatwall organization.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament brand:
Inland
Filament color:
White
Filament material:
PLA+
Notes:
The original design was done elsewhere and I remixed this. I don't have the original link or I would give a shoutout. A buddy needed one and after printing out the original design we realized the ears were too thick and wouldn't slot into the slatwall without a dremel massage. This is the edited version that should fit nicely.