摩托车头盔镜（下巴安装）

Motorcycle Helmet Mirror (chin mounted)

2024-03-24 11:55:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This motorcycle helmet mirror is mounted on the chin of the helmet and is designed to fit the following flat oval mirror:
https://www.amazon.com/dp/B0CVMSDZNR?psc=1&ref=ppx_yo2ov_dt_b_product_details
Unlike the side mounted version, the chin mounted mirror isn't prone to vibration when riding over bumps. The flat mirror provides an undistorted rear view.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 mm layer height
Infill:
40%
Filament brand:
Creality
Filament material:
PLA
Notes:
I had to reduce "Support X/Y Distance" to 0.4 mm and set "Support Distance Priority" to "Z overrides X/Y", in order to ensure the top of the support is close enough to the top overhanging portion of the horn. I also set "Support Overhang Angle" to 55 degrees.

Post-Printing

I glued the flat mirror to the holder with E6000.
The ball end of the chin horn lightly snaps into the ball joint on the mirror holder.
I used a small screw (optional) to snug the ball joint prior to inserting a drop of E6000 in the ball joint with the mirror at the desired angle.

I sanded the base to match the contour of the helmet.
Then, I glued the chin horn to the helmet with E6000.

Let the E6000 cure 48 hours.