Skytrak保护壳

Skytrak protective case

2024-03-25 23:50:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a basic case for use on an OG skytrak. I wasn't a fan of the metal cases offered and wanted a sleeve style. Base incorporates leveling knobs and is attached to the unit using m4 screws. The top cover with the hole is used in conjunction with a 32mm bullseye level.

1/4'' lexan is used for the camera cover and will have to be sourced and cut accordingly. I've included a file to use as a template that matches the size and cuts required. Faceplate and top cover are mounted using 8x m3 screws and 8x m3 nuts. You will need to print 3 of the leveling knobs.

Print Settings

Printer:
Custom cartesian bowden
Rafts:
No
Supports:
Yes
Resolution:
.5
Infill:
31%
Filament brand:
idk
Filament color:
Clear
Filament material:
TPU/ASA
Notes:
Case itself was printed using TPU. The level base and knobs were printed with ASA, however ABS will also work. You can use PLA for the base depending on the environment you plan to use or store it in.

Depending on your machine you can get away with no support on everything except the main cover where the lexan goes. Please inspect your slicer settings before hitting print.

With a .8 nozzle and .5 layer height this print took 12 hours, Longer times could be better suited to printers not up to the task of a 12 hour TPU print.