手机支架（这很合理）2.0
Phone Stand (That makes sense) 2.0
2023-08-19 12:53:31
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this phone stand because no other phone stand had what I wanted. This phone stand is robust and elegant. Thick holding knobs for front and back if you have a large phone or case. Large slot underneath for a cable and a very low angle (About --> \ much angle without case) for desks and tables where you are not positioned high. Only requires support for the charging slot and knobs. MUST BE PRINTED ON IT'S SIDE!
Print Settings
- Rafts:No
- Supports:Yes
- Resolution:0.2-4 mm
- Infill:15 percent
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA, ABS
- Notes:
You might want to sand some corners down if they come out sharp.
License
CC BY
Phone Stand (That makes sense) 2.0
by Qanoz is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi外壳2023-03-27 -
PGO BR200 验车速度传感器盒2023-08-09 -
老板螃蟹 KGC-0102023-09-08 -
Arduino继电器模块外壳2024-01-14
最热下载
-
Makita 10.8V 钻具与电池组2023-04-07 -
硫化机模型2024-04-13 -
Ikea 米兹顿 插嵌2024-04-20 -
GTA 5 大地图模型2024-04-21 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
模块化笔筒链2025-07-19 -
巴黎卢浮宫的三圣母像2025-07-16 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
关节活动人，假人13,Dummy 132025-07-02