基础级别 Lego 速率冠军展示模块，可叠放

Basic Lego Speed Champion Expositor Stackable

2024-03-24 19:33:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have created a very simple stackable expositor for my Lego Speed Champs and other little cars. I have searched and the current models I did not like or I did not want to drill somewhere. I wanted to do something simple and fast to print and I have tried to use a minimum filament as possible due to have a little amount of PLA. To print 4 pillars takes approximately 1h 20 minutes and the base 1h each.
I am using Elegoo Neptune Pro 4, 0.4mm nozzle and Rapid PLA+ from Elegoo as well. I have used tree supports on the pillars to be printed vertically, haven't tried horizontally. Infill 5% on both. Default Brim from OrcaSlicer.
I will be working on new designs for pillars and new dimensions for both base and pillars.
I am leaving as well the CAD files from FreeCAD to allow you modify it at your will :)

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
5%
Filament brand:
Elegoo
Filament color:
Black, Blue and White
Filament material:
Rapid PLA+
Notes:
Supports only needed for the pillars, not sure if they are 100%, not tested yet.
Temperature used: 220ºC on extruder, 60ºC bed.
Open to suggestions to improve quality and design.