Heltec 无线 Paper 18650 纸盒

Heltec Wireless Paper 18650 Case

2024-03-24 20:30:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I thought that the Heltec Wireless Paper Slim Case was the best case around for the Wireless Paper, but I wanted to power it by an 18650 battery. I modified the bottom part to add a space for the battery; this only replaces the bottom, get the rest of the files from that thing!

The idea is that you spot weld bent nickel strips onto each side of the battery, and the extra width of those strips holds the battery in place. Do not solder directly to the battery! Solder the nickel strips to your cables before you do the spot weld! And make sure that you understand how to safely spot weld to an 18650.

Print this upside down with supports. It could probably be modified by a real 3D designer to be support less, but I don't unfortunately have the experience to do so, this works for me :-)

As a bonus I've also included a version of the frame which has larger holes for screws to hold the wireless paper -- I've gone for 2mm diameter.