可重复使用的帆布带打印模板，支持PLA材质

reusable zip tie printable with PLA!

2024-03-25 04:38:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

i had trouble with cable organization for some time at first I just threw them all in a box together and they tangled up (no surprise) then I used zip ties which are fine for long term storage but suck for things you use a lot because zip ties are only one time use, so I looked on thingiverse and nobody seemed to have any reusable zip tie designs that suited my needs so I made my own. Don't use supports I designed this to not use supports. if you want anything different just let me know the comments
ps the pics are of the short tie
short tie length: 167.5 mm or 6.6"
medium tie length: 215.5 mm or 8.5"
long tie length: 297 mm or 11.7"