可乐奇艺 3D模型：可重复使用杯具配件

Keurig Reusable cup accessories

2024-04-30 23:58:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here are two accessories to go along with the Keurig My K-Cup reusable coffee filters, as seen here:https://www.keurig.com/My-K-Cup%C2%AE-Universal-Reusable-Coffee-Filter/p/My-K-Cup-Universal-Reusable-Coffee-Filter

Note: This design is not compatible with the Plus series adapter attached. If you use the Plus Series adapter, remove it before inserting into the stand and re-attach after.

The center port in the stand has a taper that matches the K-Cup so it is a snug fit, with slots to prevent it from rotating when securing the K-Cup lid. The funnel is a slight press fit into the filter as well so it will all stay put while filling and tapping down the grounds. The funnel is designed so that you fill the filter to the bottom of the funnel and it is filled to the max line in the filter. Once filled, you can remove the filter, insert and secure the top of the K-Cup, then give a slight pull and it will come right out. Or leave it there until ready to use and it won't roll around the counter.

I used Tree supports direct to the build plate for the overhangs and it worked fine for me. I also applied adhesive backed felt pads you can buy at the hardware store to the bottom of the stand for a more finished appearance, you can do whatever you want.