公园道驾驶光盒

Parkway Drive Light Box

2024-03-25 06:18:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My sister asked for a box to be made from one of her favorite bands. Fortunately the logo was already a primitive shape so it was a super-easy conversion.

Set this one up to use a USB-C snap-in (like my others) as well as a D1 Mini V3 and threw in an optional mount for an AOD4184 in case she changed her mind and wanted COB LEDs instead of WS2812B's.

Used a Glow-in-the-Dark for the wall accent and a silk silver for the reflective layer (as always). Came out nice and clean (and the WLED "Fire 2012" mirrored preset looks awesome!). Face should be printed at 0.2mm height with fine details for small lines, the base can be printed with as thick a line as you'd like (I run the base at 0.28). The very top of the base should be printed at least at 0.20mm though, as this one features retaining tabs to hold it together (instead of screws) and they benefit from the extra resolution.

Tuned print profiles posted to Makerworld.