达特恩 BST-1 模拟赛车驾驶舱支架

Dayton BST-1 Sim Racing Cockpit Mount

2024-05-06 03:43:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Easily mount yourDayton BST-1 Bass Shakerto the Buttkicker mount on your Next Level Racing F-GT, or mount to your aluminum profile cockpit (untested).

This allows you to use the two holes in the under-seat mounts to connect a BST-1 transducer (bass shaker). If you really want to go crazy (like I did) you can print the stencil and drill more holes on either side of the chain mounts to mount a left and right shaker.

Note: I am not a structural engineer. I weigh 175lbs (80kg) and haven't had any structural issues after drilling these holes. Do this at your own risk.

Mounting to an aluminum profile rig is untested but I assume it should work. I'd love some feedback, if not!

You can probably print these with any infill, but to ensure a solid connection between the plastic and the metal I printed at 100% infill.