布偶动作模型 第一版
Pup-Up! Steps MK1
2024-04-24 01:26:53
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Materials required for printing the supports and braces for the MK1 Pup-Up! Dog Steps. This uses a unique clamping design so that screw removal is easy and quick, as well as being adjustable for varying sizes of wood. Comes with the stl files for the brace, small and large supports, screw, and mircow screw. The wood used in the demo are 8" x 16" x 1/2" planks.
Supports only required for the Brace.
For the top and bottom steps, print out:
- 4 Small supports (2x side)
- 4 Screws (2x support)
- 4 Braces (2x step)
- 12 Mircow Screws (3x brace)
For each additional middle step, print out:
- 2 Large supports
- 6 Screws
- 2 Braces
- 12 Mircow Screws
Carbon Fiber or stronger material is recommended for more stable supports.
80% or higher infill is recommended.
Print Settings
- Supports:Yes
- Infill:80%
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
(3D Slash) Garmin_Striker_4_RAM_Mount2023-05-27 -
动作摄像头RC飞机翼舱支架2024-01-18 -
收缩包装开启器2024-04-24 -
Sonoff Zigbee 3.0 Dongle-E壁挂式智能模块2024-05-04 -
Mlem太空机构骰子塔2024-05-04
最热下载
-
二十面体骰子模型2024-03-29 -
7英寸HDMI显示器-B外壳2024-04-01 -
Ikea 米兹顿 插嵌2024-04-20 -
线框无心2024-05-08 -
艺术雕像（女性）2025-07-16
最新模型
-
3.5寸硬盘驱动器到四个2.5寸硬盘驱动器适配器（Nox Hummer Spark）2024-05-08 -
Oral-B双齿夹持器3D模型2024-05-06 -
魔杖2024-05-06 -
RC微型无人机模型2024-05-06 -
充气器盖2024-05-06