黑色雷伊光剑 - Xenopixel 3D模型（兼容星球大战）

Dark Rey Lightsaber Xenopixel COMPATIBLE star wars

2023-03-26 18:54:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Here is my creation of the dark Rey saber compatible with rgb smooth swing type electronics. I made a single version and a double version. You will therefore find 3 grips. One for the single version (solo grip) and two (double grip P1 and P2) for the double version. The emitter and the cannister are the same, to be printed twice if you wish to make a duplicate. Regarding the printing I did several tests and for it to be very solid it is necessary to make some important adjustments, which is why I joined the 3mf with the correct parameters under cura in addition to the basic stls.
nFor the double version you will also need to find magnets (x12) 6mm in diameter and 6mm long and (x2) 5mm in diameter 3mm long for the systems to maintain positions deployed or not of the saber. Check amazon for that.
nRegarding the non-essential parts. Metal details you will need to print 8 of them. The button extension is to be glued on the xenopixel ignition button with double-sided foam mounting tape.

黑色雷伊光剑 - Xenopixel 3D模型（兼容星球大战）

朋友，你觉得上面这个模型，属于下面的哪个分类？