PS5硬盘驱动器容纳盒 / WD黑色高性能硬盘存储盒

PS5 Hard Drive Holder / WD Black HD Holder

2024-04-28 19:53:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Really wanted something that held my WD Black HD securely to the side of my PS5. I had seen others and got some good ideas on what to include and made my own design. This HD holder won't let your HD slide our of either side, has space to run cords so you can mount it on either side, and the included hanger holds it nice and close to the side of your PS5. Yes it can work for other HD's but it must be under 124mm x 21mm with the usb connector on either end. This is a work in progress as the hanger may need some sanding and make sure you glue it on the correct side. It will also work over most silicon covers as you can see in the pic. If you want the PS5 logo blue and your slicer supports color change just set it to change right after the first layer of the logo and it looks really nice. Contact me first if you might want to make a derivative otherwise no derivatives.

I would print it at 100% solid but you can make it light and do it at 15%. However make the hanger 100% solid no matter what.
This took a lot of time and testing please donate if you want to support more.
Please leave helpful feedback and only ask questions pertaining to the model.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK3
Resolution:
.20mm
Infill:
15%
Filament brand:
Unknown
Filament color:
Black
Filament material:
petg
Notes:
Make sure you set 100% infill for the hanger if your slicer doesn't automatically set that.

Stuff I know and might get fixed:
• Slot is hard to clear out supports.
• I know you can do this yourself but was looking for a way to position it better on the plate to use less supports.
• Slot and hanger requires superglue to hold....might redo this / make it diffrent but it works fine.
• Slot insert on hanger might need to be shorted a bit or modified a bit. This can be done by just sanding it but might redo the design if I get some time.
• Raising PS5 logo a bit and possibly making it interchangeable with other logos.