壁挂式书本架

Wall Book Holder

2024-03-25 09:52:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Needed a neat place to store a book and reading glasses in the bathroom, so I designed this in Tinkercad. It can hold up to around a 1 1/4" or 34mm thick book and standard reading glasses. The glasses holder box on the side can easily be deleted if desired. This mounts to a wall using 2 standard drywall screws. The beveled screw holes are incorporated in the design and can be easily accessed by a standard length screwdriver or long driver bit through the hex holes in one side of the holder. I mounted the holder at this angle because I think it looks cool and so that I was able to hit a stud with both screws. Any other angle may require drywall anchors for a secure installation.