Tama

2024-03-25 12:44:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

PROPERTY OF SPIKE CHUNSOFT. USED WITHOUT PERMISSION.

the minor problems encountered in the first print have been resolved in the updated BLEND and STL posted above. be aware that her hair is VERY heavy. the resin you need to print Tama is roughly 2.5x the amount you'd need for a regular 1:4 print.

a problem which might persist is on her thighs. the peel forge generated by the diagonal angle of her legs causes webbing issues. i mirrored her more 'expressive' hand to replace the 'boring' one which had the fingers bunched together in parallel. it should still be there in the BLEND if you want to check it out. the original in-game model has bare feet, so you might want to print her legs.

some of her VERY fine hair was left out of the print since it just wasn't worth the risk and i also hid the eyelash tips which were too small to be seen at this scale. i thought there was a problem with her hat near the top front but that's how it is supposed to be, unless there is a obscure transparency i missed when going through the draw calls.

enjoy! and don't forget to hollow your STL in PrusaSlicer.

P.S. its a lot of resin! plan your print accordingly... i had to top up twice.