50% scale remix of VEX Robotics 12" Trophy by NWRobotics

2024-03-25 12:44:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

50% scale remix of VEX Robotics 12" Trophy by NWRobotics

Summary

All files and final model is 50% scale of the original.

Added faux bolt heads made from https://grabcad.com/library/vex-trophy-1 file called nut.ipt that I had to convert to stl using fusion 360.

I did some modifications to the spacers and added faux bolts from the site shown above to make easier to assemble since I was gluing my fingers to the trophy and taking about 15 to 20 minutes per trophy (aside from printing). I got assembly time down to about 5-8 minutes per trophy--possibly less if I had better glue.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
35%
Filament brand:
Elegoo, Inland, and Creality
Filament color:
Gray Silk, White, and black
Filament material:
PLA
Notes:
No supports needed

CA glue (super glue) is recommended.
Approximately 2.5 mm drill bit and pen vice drill.

I re-posted all the files here in one place for ease of printing.

You will need for each trophy:
1 x Silver_Trophy
1 x Black_Stand
1 x Black_Date Plate--you will need to add current date before printing
1 x Black_Award_Plate OR VEXCompLogoPlate
4 x VEX FAUX BOLT head (2 for the date plate and 2 for the Award/Logo Plate
4 x VEX_hole_spacer2--for inserting the faux bolt shafts into to attach the Silver_Trophy to the black_stand
8 x VEX FAUX BOLT w shaft--use the small drill to slightly widen the holes in the mesh of the trophy and stand to put the Faux Bolts through.

How I Designed This

Modification is the name of the game

I used Tinkercad to cut off the shaft to make the nut..er bolt heads to go on the year and award plates. I resized the spacers and made the cylindrical void to fit the bolt shafts since they were very close to fitting through the mesh on the silver and black trophy and stand (I used a small drill to widen the holes just a bit).

Since I could use the faux bolts with a little super glue to insert into the spacers, it made holding the pieces in place a breeze--where before I could not keep the pieces in place to keep them straight and I ended up with a mm thick coat of superglue on all my fingers.