笔和手机支架（非Post-it式挂钩）
pen and phone holder Post it not attachment
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an attachment to my other design uploaded on the 10/1/24 which helps with the storage and easy access to post it notes. These attachment slot between the slats in the pen pot.
Please check out the design of the pen and phone holder
Pen and phone holder design - https://www.thingiverse.com/thing:6426813
MicroSD and SD card attachment - https://www.thingiverse.com/thing:6548652
Print Settings
- Printer brand:
Creality
- Printer:
Ender 2
- Supports:Yes
- Infill:40%
- Filament brand:
esun
- Filament color:
same colour as the pen and phone holder
- Filament material:
PLA
- Notes:
photos will be added later
Post-Printing
there is some tolerance already in the design however some filing if the design might be necessary.
Then slot the attachment in between any slat on the pen and phone holder. but not the front as it may not fit whilst the phone is on the pen pot.
Please check out the design of the pen and phone holder
Pen and phone holder design - https://www.thingiverse.com/thing:6426813
MicroSD and SD card attachment - https://www.thingiverse.com/thing:6548652
License
pen and phone holder Post it not attachment
by R0ebot16 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
单18350型号电池的盒子2023-03-26 -
骑士之魂2023-03-26 -
ESP8266与OLED 1306案例分析2023-09-16 -
力量感十足的宙斯3D模型2024-04-29 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
微型罗尼：卡宾转换模块，适用于大多数GBB空气枪2023-03-26 -
MK47 模组道具枪2023-03-26 -
1:10比例Chevrolet Camaro RC车身（测试部分）2023-09-06 -
远投笼2024-04-06 -
FFBeast仿真飞行器模拟轮部件2024-04-19
最新模型
-
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
爱你的小茶杯狗2024-05-08 -
ABS 1.5英寸盖2024-05-08 -
泡泡魔杖瓶架2024-05-06 -
Radion XR15 支架2024-05-06