电池箱 18650 四件
Battery Case 18650 4 pieces
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I designed this cover for my son's RC car (Absima 1:14 Sand Buggy). The cover stores 4 batteries.
These are unprotected cells with a high positive cap. Protected cells do not fit.
Empty batteries can be stored rotated 180°.
The lid is held in place by magnets. I inserted these during the printing process (this is possible by changing the g-codes, in Cura "pause at hight"). Important: When inserting the magnets, pay attention to the correct polarity, otherwise they will repel each other.
The magnets have a diameter of 5mm and a thickness of 1,5mm (I always use the magnets from the Gizeh packaging)
License
Battery Case 18650 4 pieces
by schmierfink is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
联系我们
热门推荐
-
马扎达 HE09-32-201 弹簧缓冲单元2023-03-26 -
Fidget Spinner - 单体打印 / 无需轴承2023-03-26 -
电视柜2023-05-02 -
书架支撑结构2024-01-04 -
MP5 SD6 M型锁定手把2024-01-14
最热下载
-
GPD Win3 把手型号2023-04-07 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
篝火（Bonfire）收纳盒 / 插槽整理架（含扩展包）2024-04-12 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理2024-05-04
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
